Add: 88 Hongxing Rd.Huashi Jiangyin City Jiangsu Province
Tel: 0086-510-86210978 86210959
Fax: 0086-510-86203938
E-mail: sanliang@rubbersl.com
http://www.rubbersl.com
Nylon 6 impregnated cord fabric is an auxiliary material of rubber tire. It is mainly used for tire bead wrapping. It has excellent characteristics such as high strength and strong adhesion. Its specifications include 1400dtex / 1-9613 3 and 1400dtex / 1-74145. See Table 3 for its organization specifications
Serial number |
item |
unit |
Specification (dtex) |
|
1400dtex/1-96133 |
1400dtex/1-74145 |
|||
1 |
warp density |
root /10cm |
96 |
74 |
2 |
Weft density |
root /10cm |
12 |
10 |
3 |
width of cloth |
cm |
133 |
145 |
4 |
Cloth length |
m/ volume |
1080 |
— |
Note 1: the warp density deviation is allowed to be ± 1.5 pieces / 10cm, and the weft density deviation is allowed to be ± 1 piece / 10cm Note 2: width deviation is allowed to be ± 2cm; Note 3: if the demander has special requirements for warp and weft specifications, it can be determined by both parties through negotiation. |
||||
See Table 2 for the physical indexes of nylon 6 dipping sub mouth cloth
Serial number |
item |
unit |
Specification (dtex) |
||||||||||||
| 930dtex/1*930dtex/1 | 1400dtex/1*930dtex/1 | 1400dtex/1*1400dtex/1 | 1170dtex/1*930dtex/1 | ||||||||||||
Superior products |
First Grade | Qualified products | Superior products |
First Grade | Qualified products | Superior products | First Grade | Qualified products | Superior products |
First Grade | Qualified products | ||||
| 1 | Meridional breaking strength≥ | N/15 root |
960 |
880 | 830 | 1480 |
1360 | 1180 | 1460 | 1330 |
1180 |
|
1100 | ||
2 |
Zonal breaking strength≥ |
N/19 root |
1230 |
1080 | 980 | 1230 |
1100 | 1100 | 1790 | 1560 |
1370 |
|
1000 | ||
3 |
Peeling force≥ |
N/2.5cm |
196 |
176 | 157 | 216 |
176 | 176 | 216 | 176 |
157 |
|
160 | ||
| 4 | dip pick-up | % | 8 ± 2 | 8 ± 2 | 10 ± 2 | 7 ± 2 | |||||||||
| 5 | regain≤ | % | 1 | 1 | 1 | 1 | |||||||||
| 6 | Cloth thickness | mm | 0.57 ± 0.07 | 0.6 ± 0.08 | 0.70 ± 0.04 | 0.6 ± 0.05 | |||||||||
| 7 | elongation at break | Meridional direction | % | 13-27 | 15-25 | 15-30 | 10-20 | ||||||||
| weft | 12-47 | 26-36 | 20-40 | 26-46 | |||||||||||
| 8 | hot air shrinkage | Meridional direction≤ | % | 3 | 3 | 3 | 6 | ||||||||
| weft≤ | 3 | 4 | 3 | 6 | |||||||||||
Note 1: the warp and weft density deviation is allowed to be ± 2 pieces / 10cm; Note 2: width deviation is allowed to be ± 2cm; Note 3: if the demander has special requirements for warp and weft specifications, it can be determined by both parties through negotiation. |
|||||||||||||||
